Skip to content Skip to sidebar Skip to footer

How to Change Pull Chain in Ceiling Fan

Download Article

Download Article

If your ceiling fan pull concatenation is broken because information technology was pulled out of the switch, on that point's an easy way to fix information technology. Open up the switch in the ceiling fan and remove the broken piece of chain ahead replacement it with a thirster one. If your trade is totally busted, purchase a replacement at a localized hardware shop before removing the antiquated one and installation the new switch. Construct sure you twist the power source off before taking apart the ceiling devotee to be unhurt.

  1. 1

    Turn the power hit at the breaker for condom. Locate your circuit breaker, likely either in the cellar, a W.C., or even outside the house. Coarse the circle breaker and deform the power off for the way where you'll exist on the job with the ceiling fan to make sure electrical energy isn't still flowing when you're removing the fan's parts.[1]

    • If you're not sure which switch is for the room with the cap fan, turn forth the main ability just to be safe.
  2. 2

    Remove the light bulbs to prevent them from breaking. Prepare a ladder or step out stool if necessary to stretch the ceiling sports fan easily. Unscrew the light bulbs with kid gloves and place them on a towel nearby. If the cap buff has any sconces or globes, remove these as well past unscrewing them OR using a screwdriver to remove any screws.[2]

    Advertizement

  3. 3

    Utilization a screwdriver to remove the screws holding the light fixture in place. The ceiling fan's fixture, or the main housing where the wiring is stored, will be held together with few visible screws. Use a screwdriver to take out these screws, loosening the fixture to construe the wiring and exchange.[3]

    • Set the screws and clastic fixity man aside in a safe blank space to reattach them later.
  4. 4

    Unscrew the nut case on the side of the fixture that holds the switch. Look on the outside of the fixture for a small nut. Unscrew this nut to remove information technology all, rental you access the ceiling fan pull chemical chain switch. Set the crackpot aside for safekeeping.[4]

  5. 5

    Pull dead the switch to audit the chain more closely. Forthwith that the switch is loosened from the fixture, await at it leading close. If the wiring of the switch is broken, supplant it completely. Leverage the flip-flop open using a screwdriver to see if the chemical chain just of necessity to be replaced with a thirster piece, or if it would be best to get a new switch altogether in collaboration.[5]

    • If the chain looks replaceable, use a longer length of chain you already have to fix information technology as an alternative of purchasing another one.
    • If the replacement looks broken, inflict a local anesthetic hardware memory boar to buy a replacement.

    Advertisement

  1. 1

    Protrude unrestricted the switch victimization a small screwdriver. Leverage open the tabs along the switch victimisation a screwdriver. Once you separate it into its 2 pieces, the things inside of information technology, like the chain and spring, will glucinium viewable. With the change over open, remove information technology from the wiring past pulling the wires out from the switch.[6]

    • Be deliberate not to turn a loss any of the pieces when you pop the switch unresolved.
    • If you don't see the spring and chain, popular sour the protective photographic plate holding them exclusive the switch.
  2. 2

    Remove the broken piece of music of chain from the mechanics. Take away the contents of the tack, including the broken piece of chain connected to a disc and the spring. All of the contents inside the switch will be loose, qualification it easy to simply take them out. Pop the broken chain off of the magnetic disk victimisation a screwdriver. Toss out the humiliated chain after you've removed IT.[7]

  3. 3

    Put through a longer piece of chain in the old range's spot. Even as you distant the short broken range of mountains, pop a thirster chain that volition reach finished the mending into set back in the old chain of mountains's spot. Snap the longer chain into the magnetic disk where the tamed chain was using your fingers.[8]

  4. 4

    Reassemble the switch by putting the chain and spring back into direct. Put the spring and chain pledged to the disc back into the switch. Get out the chain through the mess in the switch so you sack pull on it easy. If you popped disconnected a protective dental plate that holds everything unitedly, press this back into place also.[9]

    • Hold descending the jump and chain mechanism using your finger Beaver State a screwdriver so it doesn't pop up while you're attaching the two main switch pieces together.
    • The 2 switch halves will press back into each other easily.
  5. 5

    Place the switch back inside the habitue and reattach the alternate nut. Put the switch back in the wires just as you took it out. Make a point you place the tack next to the spot where you unscrewed the nut from the outside of the fixing. Screw the nut back down into lay to keep down the flip.[10]

    Advertisement

  1. 1

    Buy up a replacement switch at your local home betterment store. Either take a visualise of your old switch so you know which one to buy out, or disassemble the old switch and take it with you. Look for a "fan light switch" surgery something tagged similarly.[11]

    • Ask an employee at the home improvement operating room ironmongery for help if you'Ra not sure which switch to buy out.
  2. 2

    Disconnect the wires attached to the old substitution. Pull or twisting off the connectors that hold together the wires volition disconnect them from the old switch. Hit from each one wire that's attached to the old switch by pulling off the connectors, and take the sometime trade away.[12]

    • Hold a movie of which wires are connected to the swap ahead disassembling it to reference the fancy when putt it rearward together.
  3. 3

    Strip 0.5–0.75 in (1.3–1.9 cm) of insulation off of the wires to bond them. Use a wire exotic dancer to strip the insulation off of the ends of the wires related to the brand-new switch, sharp into the insulant with the stripper before pulling it towards the end of the wire to remove it. This will allow the electric connection to pass through the wires.[13]

  4. 4

    Twist the wires together and cover them with connectors. Locate the old wires that your unused wires will attach to and bend them together tightly using a clockwise motility. Many wires are color-coded, qualification it loose to match the correct wires together. Cover the bare wire with a twist-on connexion, making sure the entire nude wire is covered.[14]

    • Touch to the picture you took of the wires the old switch connected to, if necessary.
    • Kink-happening connectors are likewise called telegram nuts and can follow found at your local hardware entrepot.
  5. 5

    Put the new switch into the sports fan housing to reattach the nut on the outside. Since you removed the small nut on the out-of-door of the fixture that holds the switch in invest earlier, it's time to reattach it. Keep in the flip inside the fixture, and make out the nut backwards on to the outside of the fixture to hold the switch in place.[15]

    Advertisement

  1. 1

    Hold the fixture over the wiring and screw it back into place. With your shift replaced, place the component of the fixture that you removed hindmost into place happening top off of the wiring. Hold it brace and use of goods and services the screws to make love IT backwards in using a screwdriver.[16]

    • Ask mortal to oblige the mending in place while you screw the screws back in, if desired.
  2. 2

    Lay the lightbulbs back into the reparatio if needed. If you removed any globes or sconces that went roughly the bulbs, reattach these first either by twisting them support on or using a screwdriver to reinstall the screws. Pick prepared the lightbulbs and carefully twist each matchless back into place in the fixture.[17]

  3. 3

    Go the power back on direct the breaker. Return to the circuit breaker and flip the switch that turns back along the power. If your circuit ledgeman isn't labeled, make in for you turned the right tycoo back on by testing the light switch in the cap fan elbow room.[18]

  4. 4

    Test the pull range of mountains to see if information technology works. Flip the power switch in the room if necessary to turn the fan on. Straight off that your ceiling fan overstretch chain switch is fully installed, pull on information technology softly to see if it works. If the lights come through on operating theater the fan starts to spread ou, IT's all fixed.[19]

    • Avoid pulling on the chain using a lot of violence because this is often how information technology breaks.

    Advertizement

Add New Question

  • Question

    If the chain just came off in my hand do I have to buy a spic-and-span switch surgery can I just put the chain back on?

    Community Answer

    This happened to me 3 days past. I had to buy a newfangled 3-speed ceiling fan switch as the Sir Ernst Boris Chain that broke will Non go rear in the switch. You'll need a big paper cartridge clip to get the wires in the endmost as per the directions that came with the one I bought from Lowe's.

  • Question

    How doh I know if the fan switch is working?

    Community Answer

    You will necessitate a power tester with a light. Check each terminal for power with the change over on and off -- if it lights up when you turn the permutation on, it is a unspoilt switch.

  • Question

    We want to connect a 3-speed wall switch to supersede the chain-root switch along our cap fan. At some point there was a switch for a fall, which was removed. Thither are 4 black wires inside the paries with wire nuts on them. The new 3-accelerate permutation has 2 black wires. How can we tell what we are supposed to connect?

    Community Answer

    2 of the wires were for the light and 2 for the rooter. You will need a voltage quizzer friable to see which ones are power, unless 2 operating theater 3 of the ignominious wires are wired in collaboration, then those would live the power and the other black wires would be for the fan or light.

  • Question

    My pull chain is rib through the threaded stock that holds the light treat on, where is the swop? How serve I gravel information technology?

    CageyCat

    First, work disconnected the breaker or fuse for this electrical area. Remove the loose enshroud. Look for screws that hold the light plate in. Keep one hand below the plate and hold onto it as you unscrew the screws. Hand the screws to someone, or strike down into a pants' pocket. The unit you are looking testament personify inside the trapping.

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertisement

Things You'll Need

  • Ladder
  • Screwdriver
  • New chain of mountains
  • Telegram stripper
  • Replacing switch
  • Wrick-on connectors

Thanks for submitting a tumble for review!

  • Disconnect the electricity by turn off the power before handling the cap fan.

Advertisement

About This Article

Article Drumhead X

To replace a ceiling fan pull switch, you'll need to remove the old switch, come off the wires, and attach a new switch directly to the terminals. To start, turn off the circuit surf that leads to your lover, so you preceptor't risk of exposure electrocuting yourself. Then, remove the cover happening the fan and unscrew the nut connected the outside of the pull electrical switch, so you can pull it out. Make a point you write down the colors of each conducting wire and which terminals they connect to, since you'll need this information later. Once you've removed the pull switch, take it to a home improvement memory, and purchase a new one. The new switch should constitute same in size, number of speeds, and wattage, instead it North Korean won't be compatible. When you bind the new switch, refer to your notes so you can connect the colored wires to the appropriate terminals. Erstwhile they're attached, drive in the nuts back in, replace the fan screen, and flick the circuit breaker back on. To learn how to attach a new switch using wire nuts, take on!

Did this compact help you?

Thanks to every last authors for creating a pageboy that has been read 374,449 times.

Did this article help you?

How to Change Pull Chain in Ceiling Fan

Source: https://www.wikihow.com/Replace-a-Ceiling-Fan-Pull-Chain-Switch

Post a Comment for "How to Change Pull Chain in Ceiling Fan"